Jump to content

Truncated binary encoding

From Wikipedia, the free encyclopedia

Truncated binary encoding is an entropy encoding typically used for uniform probability distributions with a finite alphabet. It is parameterized by an alphabet with total size of number n. It is a slightly more general form of binary encoding when n is not a power of two.

If n is a power of two, then the coded value for 0 ≤ x < n is the simple binary code for x of length log2(n). Otherwise let k = floor(log2(n)), such that 2k < n < 2k+1 and let u = 2k+1n.

Truncated binary encoding assigns the first u symbols codewords of length k and then assigns the remaining nu symbols the last nu codewords of length k + 1. Because all the codewords of length k + 1 consist of an unassigned codeword of length k with a "0" or "1" appended, the resulting code is a prefix code.

History

[edit]

Used since at least 1984, phase-in codes, also known as economy codes,[1][2][3] are also known as truncated binary encoding.

Example with n = 5

[edit]

For example, for the alphabet {0, 1, 2, 3, 4}, n = 5 and 22n < 23, hence k = 2 and u = 23 − 5 = 3. Truncated binary encoding assigns the first u symbols the codewords 00, 01, and 10, all of length 2, then assigns the last nu symbols the codewords 110 and 111, the last two codewords of length 3.

For example, if n is 5, plain binary encoding and truncated binary encoding allocates the following codewords. Digits shown struck are not transmitted in truncated binary.

Truncated
binary
Encoding Standard
binary
0 0 0 0 0
1 0 0 1 1
2 0 1 0 2
UNUSED 0 1 1 3
UNUSED 1 0 0 4
UNUSED 1 0 1 5/UNUSED
3 1 1 0 6/UNUSED
4 1 1 1 7/UNUSED

It takes 3 bits to encode n using straightforward binary encoding, hence 23n = 8 − 5 = 3 are unused.

In numerical terms, to send a value x, where 0 ≤ x < n, and where there are 2kn < 2k+1 symbols, there are u = 2k+1n unused entries when the alphabet size is rounded up to the nearest power of two. The process to encode the number x in truncated binary is: if x is less than u, encode it in k binary bits; if x is greater than or equal to u, encode the value x + u in k + 1 binary bits.

Example with n = 10

[edit]

Another example, encoding an alphabet of size 10 (between 0 and 9) requires 4 bits, but there are 24 − 10 = 6 unused codes, so input values less than 6 have the first bit discarded, while input values greater than or equal to 6 are offset by 6 to the end of the binary space. (Unused patterns are not shown in this table.)

Input
value
Offset Offset
value
Standard
binary
Truncated
binary
0 0 0 0000 000
1 0 1 0001 001
2 0 2 0010 010
3 0 3 0011 011
4 0 4 0100 100
5 0 5 0101 101
6 6 12 0110 1100
7 6 13 0111 1101
8 6 14 1000 1110
9 6 15 1001 1111

To decode, read the first k bits. If they encode a value less than u, decoding is complete. Otherwise, read an additional bit and subtract u from the result.

Example with n = 7

[edit]

Here is a more extreme case: with n = 7 the next power of 2 is 8, so k = 2 and u = 23 − 7 = 1:

Input
value
Offset Offset
value
Standard
binary
Truncated
binary
0 0 0 000 00
1 1 2 001 010
2 1 3 010 011
3 1 4 011 100
4 1 5 100 101
5 1 6 101 110
6 1 7 110 111

This last example demonstrates that a leading zero bit does not always indicate a short code; if u < 2k, some long codes will begin with a zero bit.

Simple algorithm

[edit]

Generate the truncated binary encoding for a value x, 0 ≤ x < n, where n > 0 is the size of the alphabet containing x. n need not be a power of two.

string TruncatedBinary (int x, int n)
{
	// Set k = floor(log2(n)), i.e., k such that 2^k <= n < 2^(k+1).
	int k = 0, t = n;
	while (t > 1) { k++;  t >>= 1; }

	// Set u to the number of unused codewords = 2^(k+1) - n.
	int u = (1 << k + 1) - n;

	if (x < u)
        return Binary(x, k); 
    else
        return Binary(x + u, k + 1));
}

The routine Binary is expository; usually just the rightmost len bits of the variable x are desired. Here we simply output the binary code for x using len bits, padding with high-order 0s if necessary.

string Binary (int x, int len)
{
	string s = "";
	while (x != 0) {
		if (even(x))
            s = '0' + s;
		else  s = '1' + s;
		
		x >>= 1;
	}
	while (s.Length < len)
        s = '0' + s;
	return s;
}

On efficiency

[edit]

If n is not a power of two, and k-bit symbols are observed with probability p, then (k + 1)-bit symbols are observed with probability 1 − p. We can calculate the expected number of bits per symbol as

Raw encoding of the symbol has bits. Then relative space saving s (see Data compression ratio) of the encoding can be defined as

When simplified, this expression leads to

This indicates that relative efficiency of truncated binary encoding increases as probability p of k-bit symbols increases, and the raw-encoding symbol bit-length decreases.

See also

[edit]

References

[edit]
  1. ^ Eastman, Willard L, et al. (Aug. 1984) Apparatus and Method for Compressing Data Signals and Restoring the Compressed Data Signals, US Patent 4,464,650.
  2. ^ Acharya, Tinku et Já Já, Joseph F. (oct. 1996), An on-line variable-length binary encoding of text, Information Sciences, vol 94 no 1-4, p. 1-22.
  3. ^ Job van der Zwan. "Phase-in Codes".