Jump to content

Reynolds-averaged Navier–Stokes equations

From Wikipedia, the free encyclopedia

The Reynolds-averaged Navier–Stokes equations (RANS equations) are time-averaged[a] equations of motion for fluid flow. The idea behind the equations is Reynolds decomposition, whereby an instantaneous quantity is decomposed into its time-averaged and fluctuating quantities, an idea first proposed by Osborne Reynolds.[1] The RANS equations are primarily used to describe turbulent flows. These equations can be used with approximations based on knowledge of the properties of flow turbulence to give approximate time-averaged solutions to the Navier–Stokes equations. For a stationary flow of an incompressible Newtonian fluid, these equations can be written in Einstein notation in Cartesian coordinates as:

The left hand side of this equation represents the change in mean momentum of a fluid element owing to the unsteadiness in the mean flow and the convection by the mean flow. This change is balanced by the mean body force, the isotropic stress owing to the mean pressure field, the viscous stresses, and apparent stress owing to the fluctuating velocity field, generally referred to as the Reynolds stress. This nonlinear Reynolds stress term requires additional modeling to close the RANS equation for solving, and has led to the creation of many different turbulence models. The time-average operator is a Reynolds operator.

Derivation of RANS equations

[edit]

The basic tool required for the derivation of the RANS equations from the instantaneous Navier–Stokes equations is the Reynolds decomposition. Reynolds decomposition refers to separation of the flow variable (like velocity ) into the mean (time-averaged) component () and the fluctuating component (). Because the mean operator is a Reynolds operator, it has a set of properties. One of these properties is that the mean of the fluctuating quantity is equal to zero . Thus, where is the position vector. Some authors[2] prefer using instead of for the mean term (since an overbar is sometimes used to represent a vector). In this case, the fluctuating term is represented instead by . This is possible because the two terms do not appear simultaneously in the same equation. To avoid confusion, the notation , , and will be used to represent the instantaneous, mean, and fluctuating terms, respectively.

The properties of Reynolds operators are useful in the derivation of the RANS equations. Using these properties, the Navier–Stokes equations of motion, expressed in tensor notation, are (for an incompressible Newtonian fluid): where is a vector representing external forces.

Next, each instantaneous quantity can be split into time-averaged and fluctuating components, and the resulting equation time-averaged, [b] to yield:

The momentum equation can also be written as, [c]

On further manipulations this yields,

where, is the mean rate of strain tensor.

Finally, since integration in time removes the time dependence of the resultant terms, the time derivative must be eliminated, leaving:

Equations of Reynolds stress

[edit]

The time evolution equation of Reynolds stress is given by:[3] This equation is very complicated. If is traced, turbulence kinetic energy is obtained. The last term is turbulent dissipation rate. All RANS models are based on the above equation.

Applications (RANS modelling)

[edit]
  • A model for testing performance was determined that, when combined with the vortex lattice (VLM) or boundary element method (BEM), RANS was found useful for modelling the flow of water between two contrary rotation propellers, where VLM or BEM are applied to the propellers and RANS is used for the dynamically fluxing inter-propeller state.[4]
  • The RANS equations have been widely utilized as a model for determining flow characteristics and assessing wind comfort in urban environments. This computational approach can be executed through direct calculations involving the solution of the RANS equations, or through an indirect method involving the training of machine learning algorithms using the RANS equations as a basis. The direct approach is more accurate than the indirect approach but it requires expertise in numerical methods and computational fluid dynamics (CFD), as well as substantial computational resources to handle the complexity of the equations.[5]

Notes

[edit]
  1. ^ The true time average () of a variable () is defined by For this to be a well-defined term, the limit () must be independent of the initial condition at . In the case of a chaotic dynamical system, which the equations under turbulent conditions are thought to be, this means that the system can have only one strange attractor, a result that has yet to be proved for the Navier-Stokes equations. However, assuming the limit exists (which it does for any bounded system, which fluid velocities certainly are), there exists some such that integration from to is arbitrarily close to the average. This means that given transient data over a sufficiently large time, the average can be numerically computed within some small error. However, there is no analytical way to obtain an upper bound on .
  2. ^ Splitting each instantaneous quantity into its averaged and fluctuating components yields, Time-averaging these equations yields, Note that the nonlinear terms (like ) can be simplified to
  3. ^ This follows from the mass conservation equation which gives,

See also

[edit]

References

[edit]
  1. ^ Reynolds, Osborne (1895). "On the Dynamical Theory of Incompressible Viscous Fluids and the Determination of the Criterion". Philosophical Transactions of the Royal Society of London A. 186: 123–164. Bibcode:1895RSPTA.186..123R. doi:10.1098/rsta.1895.0004. JSTOR 90643.
  2. ^ Tennekes, H.; Lumley, J. L. (1992). A first course in turbulence (14. print. ed.). Cambridge, Mass. [u.a.]: MIT Press. ISBN 978-0-262-20019-6.
  3. ^ P. Y. Chou (1945). "On velocity correlations and the solutions of the equations of turbulent fluctuation". Quart. Appl. Math. 3: 38–54. doi:10.1090/qam/11999.
  4. ^ Su, Yiran; Kinnas, Spyros A.; Jukola, Hannu (June 2017). "Application of a BEM/RANS Interactive Method to Contra-Rotating Propellers" (PDF). www.marinepropulsors.com. Espoo, Finland: International Symposium on Marine Propulsion. (Su: Ocean Engineering Group, Department of Civil, Architectural and Environmental Engineering The University of Texas at Austin; Jukola: Steerprop Ltd. P.O. Box 217, FI-26101 Rauma, Finland). p. 1. Retrieved 2 July 2021 – via Google Scholar.{{cite web}}: CS1 maint: date and year (link)
  5. ^ BenMoshe, Nir; Fattal, Eyal; Leitl, Bernd; Arav, Yehuda (June 2023). "Using Machine Learning to Predict Wind Flow in Urban Areas". Atmosphere. 14 (6): 990. doi:10.3390/atmos14060990.