Jump to content

Stator

From Wikipedia, the free encyclopedia
Rotor (lower left) and stator (upper right) of an electric motor
Stator of a 3-phase AC-motor
Stator of a brushless DC motor from computer cooler fan.

The stator is the stationary part of a rotary system,[1] found in electric generators, electric motors, sirens, mud motors, or biological rotors (such as bacterial flagella or ATP synthase). Energy flows through a stator to or from the rotating component of the system, the rotor. In an electric motor, the stator provides a magnetic field that drives the rotating armature; in a generator, the stator converts the rotating magnetic field to electric current. In fluid powered devices, the stator guides the flow of fluid to or from the rotating part of the system.

Design

[edit]

Motor stators are made either from iron/steel or from a printed circuit board (PCB). Originally applied to low-power applications, PCB stators can be lighter, smaller, and less noisy.[2]

One design embeds thin copper traces in the PCB stator that serve as the windings. The traces are interleaved with epoxy-glass laminates, that insulate each coil from its neighbors. An air core replaces the traditional iron core, saving space and weight, and allowing a smaller air gap.[2]

Hairpin windings may be used in the construction of electric motor stators. This technology, uses windings with wires that individually, may have larger cross sections than those used in conventional windings.

Motors

[edit]

Depending on the configuration of a spinning electromotive device the stator may act as the field magnet, interacting with the armature to create motion, or it may act as the armature, receiving its influence from moving field coils on the rotor. The first DC generators (known as dynamos) and DC motors put the field coils on the stator, and the power generation or motive reaction coils on the rotor. This is necessary because a continuously moving power switch known as the commutator is needed to keep the field correctly aligned across the spinning rotor. The commutator must become larger and more robust as the current increases.

Stator winding of a generator at a hydroelectric power station.

The stator of these devices may be either a permanent magnet or an electromagnet.

An AC alternator produces power across multiple high-current power generation coils connected in parallel, eliminating the commutator.

Stator of a 3-phase induction motor
Stator of a 3-phase induction motor

Fluid devices

[edit]

In a turbine, the stator element contains blades or ports used to redirect the flow of fluid. Such devices include the steam turbine and the torque converter. In a mechanical siren, the stator contains one or more rows of holes that admit air into the rotor; by controlling the flow of air through the holes, the sound of the siren can be altered. A stator can reduce the turbulence and rotational energy introduced by an axial turbine fan, creating a steady column of air with a lower Reynolds number.[3]

References

[edit]
  1. ^ Klempner, Geoff; Kerszenbaum, Isidor (2004). Operation and Maintenance of Large Turbo-Generators. John Wiley & Sons. ISBN 978-0-471-61447-0.
  2. ^ a b Gustes-Pinto, Paulo (2022-03-26). "This Axial-Flux Motor With a PCB Stator Is Ripe for an Electrified World". IEEE Spectrum. Retrieved 2022-04-26.
  3. ^ "Destratification Fans by Airius". Archived from the original on 2017-04-20. Retrieved 2017-04-19.
[edit]